Programmer Orange5 Adapter Schematics
 
Orange-5 Connectors and Panels
   
 

 

 

Adapters compatible with Orange2,3 are attached to connector SE.

       
   

 
Microwire 93cXX Connections (DIP8,SOIC8,SOIC14)
   
 

       
   

 
Adapter for reading ISO smart-card
   
 

       
   

 
Adapter for Programming microcontrollers ATMEL AT89Cx051
   
 

       
   

 
Adapter for serial programming of microcontrollers ATMEL AVR
   
 

Instead of the quartz resonator reference frequency from terminal P12 can be used.

       
   

 
Programming Microcontrollers MICROCHIP PIC
   
 

 

Orange
SE con.
6 pin
PIC10
8 pin
PIC10
8 pin
PIC12
14 pin
PIC16
18 pin
PIC16
SOP 20
PIC16
DIP 20
PIC18
28 pin
PIC16
40 pin
PIC16
P0 CLK 3 4 6 12 RB1 12 RB6 13 RB6 18 PGC 27 RB6 39 RB6
P1 DATA 1 5 7 13 RB0 13 RB7 14 RB7 19 PGD 28 RB7 40 RB7
Vpp (MCLR) 6 8 4 4 4 4 4 1 1
Gnd 2 7 8 14 5 5,6 20 8,19 12,31
Vcc 5 2 1 1 14 15,16 1 20 11,32
P2 PGM (=logic 0) - - - - 9,10 10,11 7 24,26 36,38

 

       
   

 
Adapter CAN K-Line
   
 
Orange5 CAN Socket DB9:
Name Pin
GND 1
GND 2
CAN High 3
K Line (ISO 9141-2) 4
CAN Low 5
Battery Power (+12V Vbat) 9

K-Line Pullup Jumper determines connection of the pullup resistor.
The jumper can be in three positions - 5V, 12V or removed.
Also external power supply (12V) can be attached in contact +Vbat

Jumper CAN Terminator if attached connects a resistor (120 Ohm) between CAN H and CAN L chains.

       
   

 
Adapter for Programming ER1400
   
 

       
   

 
Adapter for Programming MDA2061, MDA2062
   
 

 

+20V power supply during programming is attached to connector Vpp

       
   

 
 
 
 

Official distributer and manufacturer of CnCLab